Products
I2C Modbus TCP/IP Server Module with RJ45 connector ā IS4350-M1
$25.00
The IS4350-M1 is a Modbus TCP server module with RJ45 connector. It turns any microcontroller with an I2C port into a Modbus TCP/IP server with 65,500 Holding Registers: no TCP/IP stack, Modbus library or Ethernet hardware design required. Ideal for building Modbus TCP sensors, actuators and remote I/O.
Isolated USB 4-20mA Current Loop Receiver – Kappa4420USB
$20.00
The Kappa4420USB is an isolated USB 4-20mA receiver based on the IS4420-M1 module. Read the loop current on your PC in mA and % through a virtual COM port, without writing any firmware. Ideal for evaluating the IS4420-M1, reading 4-20mA sensors and testing transmitters.
Kappa3720Ard: IS3720 Demoboard for Arduino
$20.00
Arduino-form-factor evaluation board for the IS3720 I2C DMX+RDM receiver chip. Easily connect it to Arduino or STM32 NUCLEO boards and start prototyping your RDM product.
USB Dongle for Modbus RTU
$25.00
USB to RS485 cable with the standard Modbus RTU pinout on its RJ45 connector. Its FTDI chip appears as a standard COM port, usually without installing drivers. Ideal for using your PC as a Modbus RTU Master or Slave and for testing our Modbus RTU boards and modules.
DMX to Addressable LED Controller Chip ā IS3751
Price range: $1.95 through $3.00
This chip converts DMX512 data to Addressable LED data.
Select options
This product has multiple variants. The options may be chosen on the product page
Kappa3720Rasp: IS3720 Demoboard for Raspberry Pi
$20.00
Raspberry Pi form-factor evaluation board for the IS3720 I2C DMX+RDM receiver chip. Easily connect it to a Raspberry Pi and start prototyping your RDM product.
Modbus RTU Slave Module – IS4310-M3
$4.80
The IS4310-485M3 is a compact Modbus RS485 module with an integrated IS4310 RTU Slave chip. It includes an RS485 transceiver, dual RJ45 connectors, and 500 Holding Registers accessible via I2C. Ideal for fast integration, it simplifies Modbus communication by eliminating the need for protocol stack implementation.
Isolated RS485 Modbus RTU Slave Module: IS4310-ISO485M1
$4.80
The IS4310-ISO485M1 is an isolated RS485 Modbus RTU slave module built around the IS4310 chip. Your microcontroller, Arduino or Raspberry Pi simply reads and writes 500 Holding Registers over I2C, while the module handles the Modbus RTU protocol on a galvanically isolated RS485 bus with two daisy-chained RJ45 connectors. Ideal for harsh environments and long cable runs.
RS232 Modbus RTU Slave Module: IS4310-232M5
$4.54
The IS4310-232M5 is a compact RS232 Modbus RTU Slave module with the IS4310 chip. It includes an RS232 transceiver, a DB9 connector, and 500 Holding Registers accessible via I2C. Ideal for adding a Modbus RS232 port to sensors, actuators and controllers without implementing a protocol stack.
Kappa4310Ard: IS4310 Demoboard for Arduino
$15.00
The Kappa4310Ard is a plug-and-play evaluation board for the IS4310 Modbus RTU chip. It features an RS485 interface, dual RJ45 connectors, 500 Holding Registers, and built-in RGB LED and potentiometer for quick testing. Compatible with Arduino and STM32 Nucleo, it's ideal for rapid Modbus prototyping without the need for custom hardware.
Kappa4320Ard: IS4320 Demoboard for Arduino
$15.00
The Kappa4320Ard is a plug-and-play evaluation board for the IS4320 Modbus RTU chip. It features an RS485 interface with two daisy chained RJ45 connectors, a built-in RGB LED and potentiometer for quick testing. Compatible with Arduino and STM32 Nucleo, it's ideal for rapid Modbus prototyping without the need for custom hardware.
Kappa4310Rasp: IS4310 Demoboard for Raspberry Pi
$15.00
The Kappa4310Rasp is a plug-and-play evaluation board for the IS4310 Modbus RTU Slave chip designed for Raspberry Pi. It enables fast prototyping without the need for soldering.








































