Products

DamnI2cUsb

The DamnI2cUsb is a USB to I2C Master interface that allows a PC or Mac to operate as an I2C Master device, similar to a microcontroller. Communication is handled over a serial link, making it compatible with Python and other scripting or programming languages.

MQTT Ethernet Client Chip – IS4510

6,83 €

The MQTT Ethernet Client Chip (IS4510) provides instant, reliable IoT connectivity by integrating the complete Ethernet and MQTT stack in one chip. Connect to any MQTT broker using simple I2C commands.

SKU: IS4360

SO8N Socket

6,00 €

Solderless SO8N socket-to-DIP adapter for breadboards. The socket lets you swap chips as many times as needed, without soldering. Compatible with all INACKS 8-pin chips.

Add to cart

SO8N to Breadboard Adapter

1,50 €

Simple SO8 to DIP adapter for breadboard use. Compatible with all INACKS 8-pin chips.

SKU: SO8N-BB

Add to cart

USB Webcam to SPI – IS3810

6,83 €

This USB webcam reader chip converts video data to SPI, making it easily accessible for your microcontroller.

SKU: IS3810-L64

Add to cart

I2C 4-20mA Current Loop Receiver Module – IS4420-M1

The IS4420-M1 is a professional 8-pin I2C current loop receiver designed to convert 4-20mA analog signals into digital data. This module eliminates the need for complex analog-to-digital conversion circuits, allowing you to read industrial sensor data directly via I2C.

SKU: IS4420-M1

I2C 4-20mA Current Loop Transmitter Module – IS4410-M2

The I2C 4-20mA current loop transmitter is a compact 8-pin module that converts digital signals into precise industrial analog currents. This plug-and-play solution simplifies your hardware design by providing a reliable I2C interface for standard industrial communication.

SKU: IS4410-M2

I2C Addressable LED Controller Chip – IS3750

1,95 €

The IS3750 is an Addressable LED controller chip with I2C interface. It streams LED data from internal memory, freeing your microcontroller from strict timing. 5V-tolerant, 3.3V-powered, and ideal for smooth LED updates with minimal resource usage — even during slow or partial data writes.

SKU: IS3750-S8

Add to cart

I2C DMX Receiver – IS3710

1,95 €

The DMX Receiver Chip (IS3710) instantly buffers an entire DMX512 universe, providing reliable channel data via a simple I2C interface. Eliminate complex timing constraints and save valuable firmware engineering time.

SKU: IS3710-S8

Add to cart

I2C Modbus RTU Slave Chip – IS4310

1,95 €

The IS4310 is a chip with a built-in Modbus RTU Slave stack and 500 Holding Registers. It connects to a microcontroller via I2C and to a PLC via UART. No libraries needed. Ideal for sensors, actuators, or mixed setups. Speeds up development while ensuring full Modbus protocol compliance.

SKU: IS4310-S8

Add to cart

I2C RDM Responder – IS3720

1,95 €

The IS3720 is an RDM responder chip that adds RDM support to your product via I2C — no libraries needed. It receives DMX, handles RDM queries internally, and exposes DMX data and RDM settings through a simple memory map. Supports 512 DMX channels and works with any RS485 transceiver.

SKU: IS3720-S8

Add to cart

SPI to Pendrive Chip – IS3920

1,95 €

Effortlessly integrate USB Mass Storage into your projects with the SPI to PenDrive IC IS3920. This essential integrated circuit simplifies microcontroller-to-USB flash drive communication.

SKU: IS3920-S8

Products

Recently viewed

Products