I2C/UART Current Loop Receiver for Your Microcontroller
The IS4420-M1 is an I2C/UART current loop receiver module. It reads a 4-20mA current loop and gives your microcontroller the loop current in mA or as a percentage, over I2C or as a line of text on its UART output. As a result, you can add a 4-20mA input to your product without designing any analog circuitry.
The loop current flows through a precision 150 Ī© resistor on the module. The module measures it, averages each reading over 100 ms to reject 50 Hz and 60 Hz noise, and converts it to milliamps. In addition, INACKS calibrates every module at 4 mA and 20 mA before shipping.
Applications
- Sensors and transmitters: read 4-20mA pressure, temperature, flow and level transmitters from your microcontroller.
- Controllers and data loggers: add 4-20mA analog inputs to your own designs.
- PC monitoring: read the UART text line on a PC through a USB-to-UART adapter.
How to Read the Loop Current
Over I2C: write the 2-byte register address 0x0000, then read 2 bytes with a repeated START: MA_INT (whole mA) and MA_FRAC (hundredths of mA). For example, 12 and 34 mean 12.34 mA. The next registers hold the percentage and the temperature inside the module.
Over UART: the TX pad sends one line of text about every 103 ms, at 115200 baud, 8N1, so you don’t need to send any command:
12.34mA_+052.1%_+025deg_IS4420M1_ver0
Free Windows Software
To see the loop current on a PC, connect the TX pad to a USB-to-UART adapter and run IS4420WIN, our free Windows program. It finds the module by itself and shows the current, the percentage and the temperature inside the module, with a needle gauge and CSV logging.
Download IS4420WIN from GitHub
Key Features
- Input: 4-20mA loop, 2-wire or 3-wire, range 0 to 21.50 mA.
- Outputs: current with 0.01 mA resolution, percentage of the 4-20mA span with 0.1 % resolution (negative below 4 mA), and the temperature inside the module in °C.
- I2C interface: 3.3 V, 5 selectable addresses (26 to 30), 100 kHz, 400 kHz and 1 MHz.
- UART output: transmit only, 115200 baud, one text line about every 103 ms.
- Factory calibration at 4 mA and 20 mA, which you can also redo over I2C.
- Power supply: 3.3 V.
- Compact module: 12.70 Ć 10.16 mm, 8 pads at 2.54 mm pitch.




