Products

Art-Net Controller – IS3740

6,83 €

The ArtNet Controller Chip (IS3740) provides instant professional lighting control by implementing the full Ethernet and ArtNet protocol stacks. Send DMX data over SPI and let the chip handle the network complexity.

SKU: IS3740-L64

DamnModIsoUsb

49,00 €

This USB Modbus device turns your PC or Mac into a Modbus RTU Slave or Master. It features a robust USB connector and galvanic isolation to ensure safe operation.

DLMS/COSEM (IEC 62056) Protocol Chip – IS62056

1,95 €

The DLMS/COSEM Protocol Chip (IS62056) simplifies smart energy metering by providing a hardware-based, certified communication stack. Integrate globally standardized IEC 62056 communication via a simple I2C interface.

SKU: IS62056-S8

Energy Meter IEC870-5-102 Chip – IS8705102

1,95 €

The Energy Meter IEC 870-5-102 Chip (IS8705102) provides an efficient, hardware-accelerated solution for energy metering data exchange. Simplify compliance with this specialized standard for integrated totals transmission.

SKU: IS8705102-S8

Art-Net Receiver – IS3730

6,83 €

The ArtNet Receiver Chip (IS3730) delivers instant DMX data from Ethernet by integrating the full network and ArtNet stack. Receive lighting control signals and output raw DMX data via a simple SPI interface.

SKU: IS3730-L64

Kappa3750Ard: IS3750 Demoboard for Arduino

15,00 €

The Kappa3750Ard is a plug-and-play evaluation board for the IS3750 Addressable LED Controller. It features 36 WS2813 RGB LEDs, I2C voltage/speed jumpers, onboard pull-ups, and Arduino-compatible layout. Designed for seamless prototyping, it simplifies addressable LED control while offloading timing from your microcontroller.

SKU: Kappa3750Ard

Add to cart

Kappa3750Rasp: IS3750 Demoboard for Raspberry Pi

15,00 €

The Kappa3750Rasp is a plug-and-play evaluation board for the IS3750 Addressable LED Controller. It includes 28 WS2812B LEDs, I2C speed/voltage jumpers, and a Raspberry Pi–compatible form factor. Ideal for LED prototyping, it offloads LED timing and supports any color order (RGB, GRB, GRBW, etc.).

SKU: Kappa3750Rasp

Add to cart

Modbus TCP/IP Client Chip – IS4360

6,83 €

The IS4360 is a Modbus TCP/IP Master chip with built-in protocol stack and I2C control. It generates and handles Modbus frames (0x03, 0x06, 0x10), manages timing and CRC, and stores results in internal memory. With I2C for control and UART for fieldbus output, it drastically simplifies Modbus TCP/IP Master implementation.

SKU: IS4360-L64

RDM Controller – IS3725

1,95 €

The IS3725 is an RDM Controller chip with I2C interface and full DMX universe support. It streams 512 DMX channels and handles RDM discovery and queries — no libraries, timing, or UART management required. Just write via I2C; it does the rest. Ideal for building smart, RDM-enabled lighting controllers fast.

SKU: IS3725-S8

4-20mA to Modbus TCP/IP Server Chip – IS4355

6,83 €

The IS4355 is a high-integration 7-channel 4-20mA to Modbus TCP server chip designed for rapid Ethernet development. It eliminates the complexity of manual stack implementation while concentrating multiple analog inputs into a single compact solution

SKU: IS4355-L64

Kappa3710Ard: IS3710 Evaluation Board for Arduino

15,00 €

The Kappa3710Ard is a plug-and-play evaluation board for the IS3710 I2C DMX Receiver chip. It features two XLR-3 connectors, an RGB LED, and an Arduino–compatible form factor. Designed for rapid prototyping, it simplifies DMX data reception and helps accelerate your product’s time to market.

SKU: Kappa3710Ard

Add to cart

Kappa3710Rasp: IS3710 Evaluation Board for Raspberry Pi

15,00 €

The Kappa3710Rasp is a plug-and-play evaluation board for the IS3710 I2C DMX Receiver chip. It features an RGB LED, I2C speed configuration jumpers, and a Raspberry Pi–compatible form factor. Designed for rapid prototyping, it simplifies DMX data reception and helps accelerate your product’s time to market.

SKU: Kappa3710Rasp

Add to cart

Products

Recently viewed

Products