SO8N Socket
6,00 €
Solderless SO8N socket-to-DIP adapter for breadboards. The socket lets you swap chips as many times as needed, without soldering.
Protocols
Recently viewed
Products
SO8N to Breadboard Adapter
1,50 €
Simple PCB adapter to mount an 8-pin SMD chip in DIP format for breadboard use.
I2C Modbus RTU Slave Chip – IS4310
1,95 €
The IS4310 is a chip with a built-in Modbus RTU Slave stack and 500 Holding Registers. It connects to a microcontroller via I2C and to a PLC via UART. No libraries needed. Ideal for sensors, actuators, or mixed setups. Speeds up development while ensuring full Modbus protocol compliance.
Modbus RTU Master Chip – IS4320
1,95 €
The IS4320 is a chip with a built-in Modbus RTU Master stack. Your microcontroller communicates via I2C, while the chip handles frame generation, timing, and CRC. Supports Read/Write functions and connects to Modbus slaves over UART. Simplifies integration and speeds up development.
RS485 Modbus RTU Slave Module: IS4310-485M2
4,54 €
The IS4310-485M2 is a compact Modbus RS485 module with an integrated IS4310 RTU Slave chip. It includes an RS485 transceiver, dual RJ45 connectors, and 500 Holding Registers accessible via I2C. Ideal for fast integration, it simplifies Modbus communication by eliminating the need for protocol stack implementation.
Isolated RS485 Modbus RTU Slave Module: IS4310-ISO485M6
4,80 €
The IS4310-ISO485M6 is an isolated Modbus RS485 module with the IS4310 RTU Slave chip. It features galvanic isolation, an RS485 transceiver, dual RJ45 connectors, and 500 Holding Registers accessible via I2C. Designed for harsh environments and long cable runs, it ensures robust communication while simplifying Modbus integration and reducing development time.
RS232 Modbus RTU Slave Module: IS4310-232M4
4,54 €
The IS4310-232M4 is a ready-to-operate module integrating the Modbus RTU Slave chip IS4310 with an RS232 transceiver.
Kappa4310Ard: IS4310 Demoboard for Arduino
15,00 €
The Kappa4310Ard is a plug-and-play evaluation board for the IS4310 Modbus RTU chip. It features an RS485 interface, dual RJ45 connectors, 500 Holding Registers, and built-in RGB LED and potentiometer for quick testing. Compatible with Arduino and STM32 Nucleo, it's ideal for rapid Modbus prototyping without the need for custom hardware.
Kappa4310Rasp: IS4310 Demoboard for Raspberry Pi
15,00 €
The Kappa3750Rasp is a plug-and-play evaluation board for the IS3750 Addressable LED Controller. It features 28 WS2812B LEDs, I2C speed/voltage jumpers, and a Raspberry Pi/Arduino compatible form factor. Ideal for rapid prototyping, it simplifies LED control while ensuring precise protocol timing.
Art-Net Controller – IS3740
4,95 €
The IS3740 is an Art-Net controller chip with SPI input and Ethernet output via RMII. It converts DMX data from your microcontroller into Art-Net packets, handling all protocol and Ethernet stack complexity. Just send DMX via SPI — the chip takes care of the rest.
Art-Net Receiver – IS3730
4,95 €
The IS3730 is an Art-Net receiver chip with SPI interface and Ethernet PHY support. It receives Art-Net data over Ethernet (via RMII) and outputs DMX channel values via SPI. No Ethernet stack or Art-Net parsing required — just clean, ready-to-use DMX data for your microcontroller.
DMX Controller – IS3715
1,95 €
The IS3715 is a DMX transmitter chip with I2C control, built for simplicity. Just write values to its internal memory map — no DMX timing, framing, or UART needed. Supports 512 DMX channels, 100 kHz–1 MHz I2C speeds, and works with any RS485 transceiver. Perfect for fast, hassle-free DMX integration.