Skip to main contentSkip to footer

I2C

DamnI2cUsb

The DamnI2cUsb is a USB to I2C Master interface that allows a PC or Mac to operate as an I2C Master device, similar to a microcontroller. Communication is handled over a serial link, making it compatible with Python and other scripting or programming languages.

MQTT Ethernet Client Chip – IS4510

6,83 

The MQTT Ethernet Client Chip (IS4510) provides instant, reliable IoT connectivity by integrating the complete Ethernet and MQTT stack in one chip. Connect to any MQTT broker using simple I2C commands.
SKU: IS4360

I2C Addressable LED Controller Chip – IS3750

1,95 

The IS3750 is an Addressable LED controller chip with I2C interface. It streams LED data from internal memory, freeing your microcontroller from strict timing. 5V-tolerant, 3.3V-powered, and ideal for smooth LED updates with minimal resource usage — even during slow or partial data writes.
SKU: IS3750-S8

I2C DMX Receiver – IS3710

1,95 

The DMX Receiver Chip (IS3710) instantly buffers an entire DMX512 universe, providing reliable channel data via a simple I2C interface. Eliminate complex timing constraints and save valuable firmware engineering time.
SKU: IS3710-S8

I2C Modbus RTU Slave Chip – IS4310

1,95 

The IS4310 is a chip with a built-in Modbus RTU Slave stack and 500 Holding Registers. It connects to a microcontroller via I2C and to a PLC via UART. No libraries needed. Ideal for sensors, actuators, or mixed setups. Speeds up development while ensuring full Modbus protocol compliance.
SKU: IS4310-S8

I2C RDM Responder – IS3720

1,95 

The IS3720 is an RDM responder chip that adds RDM support to your product via I2C — no libraries needed. It receives DMX, handles RDM queries internally, and exposes DMX data and RDM settings through a simple memory map. Supports 512 DMX channels and works with any RS485 transceiver.
SKU: IS3720-S8

4-20mA to Modbus RTU Slave Chip – IS4315

1,95 

Enhance your industrial automation system with this high-precision signal converter chip. It seamlessly translates 4-20mA analog inputs into Modbus RTU digital registers for reliable data acquisition.
SKU: IS4315-S8

I2C Modbus RTU Master Chip – IS4320

1,95 

The IS4320 is a chip with an integrated Modbus RTU Master stack. Your microcontroller communicates through I2C, while the chip manages frame generation, timing, and CRC. It supports Function Codes 1, 2, 3, 4, 15, and 16, making integration straightforward and significantly reducing development time.
SKU: IS4320-S8

RDM Controller – IS3725

1,95 

The IS3725 is an RDM Controller chip with I2C interface and full DMX universe support. It streams 512 DMX channels and handles RDM discovery and queries — no libraries, timing, or UART management required. Just write via I2C; it does the rest. Ideal for building smart, RDM-enabled lighting controllers fast.
SKU: IS3725-S8

Art-Net Receiver Module – IS3730-M1

15,00 

The IS3730 is an Art-Net receiver chip with SPI interface and Ethernet PHY support. It receives Art-Net data over Ethernet (via RMII) and outputs DMX channel values via SPI. No Ethernet stack or Art-Net parsing required — just clean, ready-to-use DMX data for your microcontroller.
SKU: IS3730-M1

Art-Net Receiver Module – IS3730-M2

15,00 

The IS3730 is an Art-Net receiver chip with SPI interface and Ethernet PHY support. It receives Art-Net data over Ethernet (via RMII) and outputs DMX channel values via SPI. No Ethernet stack or Art-Net parsing required — just clean, ready-to-use DMX data for your microcontroller.
SKU: IS3730-M2

Modbus TCP Server Module – IS4350-M2

15,00 

The IS4350-M2 is a Modbus TCP/IP Server module with integrated protocol stack and I2C interface. It includes 500 Holding Registers, RMII for Ethernet PHY connection, and internal memory accessible via I2C. Designed to simplify Modbus TCP/IP integration, it enables rapid development without writing a single line of stack code.
SKU: IS4350-M2