Skip to main contentSkip to footer

Products

Kappa3750Ard: IS3750 Demoboard for Arduino

15,00 

The Kappa3750Ard is a plug-and-play evaluation board for the IS3750 Addressable LED Controller. It features 36 WS2813 RGB LEDs, I2C voltage/speed jumpers, onboard pull-ups, and Arduino-compatible layout. Designed for seamless prototyping, it simplifies addressable LED control while offloading timing from your microcontroller.
SKU: Kappa3750Ard

Kappa3750Rasp: IS3750 Demoboard for Raspberry Pi

15,00 

The Kappa3750Rasp is a plug-and-play evaluation board for the IS3750 Addressable LED Controller. It includes 28 WS2812B LEDs, I2C speed/voltage jumpers, and a Raspberry Pi–compatible form factor. Ideal for LED prototyping, it offloads LED timing and supports any color order (RGB, GRB, GRBW, etc.).
SKU: Kappa3750Rasp

Modbus TCP/IP Client Chip – IS4360

6,83 

The IS4360 is a Modbus TCP/IP Master chip with built-in protocol stack and I2C control. It generates and handles Modbus frames (0x03, 0x06, 0x10), manages timing and CRC, and stores results in internal memory. With I2C for control and UART for fieldbus output, it drastically simplifies Modbus TCP/IP Master implementation.
SKU: IS4360-L64

Modbus TCP/IP Server Chip – IS4350

6,83 

The IS4350 is a Modbus TCP/IP Slave chip with integrated protocol stack and I2C interface. It includes 500 Holding Registers, RMII for Ethernet PHY connection, and internal memory accessible via I2C. Designed to simplify Modbus TCP/IP integration, it enables rapid development without writing a single line of stack code.
SKU: IS4350-L64

RDM Controller – IS3725

1,95 

The IS3725 is an RDM Controller chip with I2C interface and full DMX universe support. It streams 512 DMX channels and handles RDM discovery and queries — no libraries, timing, or UART management required. Just write via I2C; it does the rest. Ideal for building smart, RDM-enabled lighting controllers fast.
SKU: IS3725-S8

RDM Responder – IS3720

1,95 

The IS3720 is an RDM responder chip that adds RDM support to your product via I2C — no libraries needed. It receives DMX, handles RDM queries internally, and exposes DMX data and RDM settings through a simple memory map. Supports 512 DMX channels and works with any RS485 transceiver.
SKU: IS3720-S8

Kappa3710Ard: IS3710 Evaluation Board for Arduino

15,00 

The Kappa3710Ard is a plug-and-play evaluation board for the IS3710 I2C DMX Receiver chip. It features an RGB LED, I2C speed and voltage configuration jumpers, and an Arduino–compatible form factor. Designed for rapid prototyping, it simplifies DMX data reception and helps accelerate your product’s time to market.
SKU: Kappa3710Ard

Kappa3710Rasp: IS3710 Evaluation Board for Raspberry Pi

15,00 

The Kappa3710Rasp is a plug-and-play evaluation board for the IS3710 I2C DMX Receiver chip. It features an RGB LED, I2C speed configuration jumpers, and a Raspberry Pi–compatible form factor. Designed for rapid prototyping, it simplifies DMX data reception and helps accelerate your product’s time to market.
SKU: Kappa3710Rasp

Kappa3715Ard: IS3715 Evaluation Board for Arduino

15,00 

The Kappa3715Ard is a plug-and-play evaluation board for the IS3715 I2C DMX Controller chip. It features 3x sliders, I2C speed and voltage configuration jumpers, and an Arduino–compatible form factor. Designed for rapid prototyping, it simplifies DMX data generation and helps accelerate your product’s time to market.
SKU: Kappa3715Ard

Kappa3715Rasp: IS3715 Evaluation Board for Raspberry Pi

15,00 

The Kappa3715Rasp is a plug-and-play evaluation board for the IS3715 I2C DMX Controller chip. It features 3x sliders, I2C speed configuration jumpers, and a Raspberry Pi–compatible form factor. Designed for rapid prototyping, it simplifies DMX data generation and helps accelerate your product’s time to market.
SKU: Kappa3715Rasp