Skip to main contentSkip to footer
My account
Need help?
Chat with us
Product has been added to your cart.
Product has been added to your cart.

Products

Recently viewed

None yet.

Lighting Protocols

I2C Addressable LED Controller Chip – IS3750

1,95 €

The IS3750 is a One-Wire Addressable LED controller chip with I2C interface. It streams LED data from internal memory, freeing your microcontroller from strict timing. 5V-tolerant, 3.3V-powered, and ideal for smooth LED updates with minimal resource usage — even during slow or partial data writes.
SKU: IS3750-S8
Add to cart

I2C DMX Receiver – IS3710

1,95 €

The IS3710 is a DMX receiver chip with I2C output — simple, fast, and reliable. It captures incoming DMX frames via UART (from any RS485 transceiver) and stores up to 512 channel values in internal registers. Just read what you need via I2C — no libraries, no timing headaches.
SKU: IS3710-S8
Add to cart

I2C DMX Controller – IS3715

1,95 €

The IS3715 is a DMX transmitter chip with I2C control, built for simplicity. Just write values to its internal memory map — no DMX timing, framing, or UART needed. Supports 512 DMX channels, 100 kHz, 400 kHz, and 1 MHz I2C speeds, and works with any RS485 transceiver. Perfect for fast, hassle-free DMX integration.
SKU: IS3715-S8
Add to cart

Art-Net Controller – IS3740

6,83 €

The IS3740 is an Art-Net controller chip with SPI input and Ethernet output via RMII. It converts DMX data from your microcontroller into Art-Net packets, handling all protocol and Ethernet stack complexity. Just send DMX via SPI — the chip takes care of the rest.
SKU: IS3740-L64
Add to cart

Art-Net Receiver – IS3730

6,83 €

The IS3730 is an Art-Net receiver chip with SPI interface and Ethernet PHY support. It receives Art-Net data over Ethernet (via RMII) and outputs DMX channel values via SPI. No Ethernet stack or Art-Net parsing required — just clean, ready-to-use DMX data for your microcontroller.
SKU: IS3730-L64
Add to cart

Kappa3750Ard: IS3750 Demoboard for Arduino

15,00 €

The Kappa3750Ard is a plug-and-play evaluation board for the IS3750 Addressable LED Controller. It features 36 WS2813 RGB LEDs, I2C voltage/speed jumpers, onboard pull-ups, and Arduino-compatible layout. Designed for seamless prototyping, it simplifies addressable LED control while offloading timing from your microcontroller.
SKU: Kappa3750Ard
Add to cart

Kappa3750Rasp: IS3750 Demoboard for Raspberry Pi

15,00 €

The Kappa3750Rasp is a plug-and-play evaluation board for the IS3750 Addressable LED Controller. It includes 28 WS2812B LEDs, I2C speed/voltage jumpers, and a Raspberry Pi–compatible form factor. Ideal for LED prototyping, it offloads LED timing and supports any color order (RGB, GRB, GRBW, etc.).
SKU: Kappa3750Rasp
Add to cart

RDM Controller – IS3725

1,95 €

The IS3725 is an RDM Controller chip with I2C interface and full DMX universe support. It streams 512 DMX channels and handles RDM discovery and queries — no libraries, timing, or UART management required. Just write via I2C; it does the rest. Ideal for building smart, RDM-enabled lighting controllers fast.
SKU: IS3725-S8
Add to cart

RDM Responder – IS3720

1,95 €

The IS3720 is an RDM responder chip that adds RDM support to your product via I2C — no libraries needed. It receives DMX, handles RDM queries internally, and exposes DMX data and RDM settings through a simple memory map. Supports 512 DMX channels and works with any RS485 transceiver.
SKU: IS3720-S8
Add to cart

Kappa3710Ard: IS3710 Evaluation Board for Arduino

15,00 €

The Kappa3710Ard is a plug-and-play evaluation board for the IS3710 I2C DMX Receiver chip. It features an RGB LED, I2C speed and voltage configuration jumpers, and an Arduino–compatible form factor. Designed for rapid prototyping, it simplifies DMX data reception and helps accelerate your product’s time to market.
SKU: Kappa3710Ard
Add to cart

Kappa3710Rasp: IS3710 Evaluation Board for Raspberry Pi

15,00 €

The Kappa3710Rasp is a plug-and-play evaluation board for the IS3710 I2C DMX Receiver chip. It features an RGB LED, I2C speed configuration jumpers, and a Raspberry Pi–compatible form factor. Designed for rapid prototyping, it simplifies DMX data reception and helps accelerate your product’s time to market.
SKU: Kappa3710Rasp
Add to cart